You can turn obstacle detection on or off either directly on your Smart Cane or through the WeWALK app.
Using the Smart Cane 2
The Obstacle Detection Button is located on the side of the cane handle, between the Calibration and the USB-C charging port. When holding the cane upright, it is the upper button on the right side and has a round shape.
- Turn On/Off Obstacle Detection – Press and hold the obstacle detection button to turn the feature on or off.
- Change Detection Range – When obstacle detection is on, press the same button briefly to cycle through Short, Mid, and Far detection levels.
Using the WeWALK App
If your WeWALK Smart Cane 2 and WeWALK app are up to date, you can also control obstacle detection via the app:
- Connect your Smart Cane 2 via the Smart Cane tab
- Tap “Device Preferences”
- Go to “Obstacle Detection Preferences”
- Set detection mode to Off, Short, Mid, or Far
- Customize feedback options:
- Turn sound on or off
- Turn vibration on or off
- Enable both for combined audio and haptic feedback
- Additional options:
- Enable continuous vibration
- Turn on the flashlight when an obstacle is detected
